Furuno Felcom 82, Operator'S Manual

Page: 55 / 230

3. TELEX COMMUNICATIONS
3-13
9. Press the [Enter] key to transmit, or select CANCEL and press the [Enter] key
to cancel transmission.
You are automatically connected to the LES selected and your message is sent
to station selected. After the message is transmitted, the line with the LES is
automatically disconnected. If five periods are typed at the end of the message,
notice of call duration appears prior to disconnection of the line.
Note: If the answerback code registered in the station list is different from what
the receiving station sends to you communication is not possible. The line
is then automatically disconnected.
Disconnecting line with LES manually
Press [F10] (Break). Notice of call duration does not appear.
Returning to standby display
After the line with the LES is disconnected, press [Esc] key to return to the
standby display, or [F3] and [8] (or [Alt] + [W]) to return the editor screen.
If you wish to connect newly the line with an LES, wait 30 seconds after the line
has been disconnected, otherwise an error message appears, resulting in no
connection.