Furuno Felcom 82, Operator'S Manual

Page: 159 / 230

6. 9.6k DATA COMMUNICATIONS
6-27
6.10 +WQ Cause Codes
Cause codes are used to indicate the states of communications. They are sent by
the LES. If the NO CARRIER, BUSY, or NO ANSWER result code is generated,
its details can be displayed with the +WQ command.
6.11 +WQ Extended Error Codes
Extended error codes are used to show the details of any error that has occurred
(with the ERROR or NO DIALTONE result code generated). The details of the
error can be displayed using the +WQ command. The values and meanings of
extended error codes are listed below:
Value
100
101
102
103
104
200
201
202
300
301
302
400
401
402
1000
2000
Text
syntax error
invalid parameter
missing mandatory parameter
too many parameters
invalid parameter length
facility unavailable
no call announcement
not connected
MES busy
MES unavailable
MES not responding
satellite not found
invalid LES
invalid TNID
Meaning
There is a syntax error in the command line.
There is an invalid parameter in the command line.
There is a missing parameter in the command line.
There are too many parameters in the command line.
The length of any parameter is invalid (+WLES, +WTNID).
The entered command is unavailable.
An A command has been entered when there is no incoming call.
The data communication failed after an O command was entered.
The MES is busy (e.g., a telephone is in use or the MES is not
synchronous with the TDM).
The MES is not properly functioning.
There is no response from the MES.
The MES has failed in synchronizing with the NCS TDM in the sea area.
The MES has failed in accessing the specified LES.
The MES has failed in accessing the specified TNID.
Reserved.
Reserved.