Furuno Felcom 82, Operator'S Manual

Page: 53 / 230

3. TELEX COMMUNICATIONS
3-11
3.2 Automatic Telex
3.2.1 Automatic telex procedure overview
A telex message is automatically sent using pre-registered LES, station and
subscriber number. Answerback codes are automatically exchanged between
sender and receiver.
There are two ways to prepare a telex message for automatic transmission:
(1) Select message from floppy disk
(2) Prepare message on the editor screen
Select subscriber from Station
List.
Select LES from LES List.
Select file from floppy disk.
(Case (1) only)
Select "SEND". You are automatically connected to
selected LES and message is transmitted to selected
subscriber. (Your ship’s answerback code is
automatically attached at the head of message.)
Select message from
floppy disk.
Case (2)
Prepare message on
editor screen beforehand.
Case (1)
Automatic telex overview