Furuno Felcom 82, Operator'S Manual

Page: 111 / 230

4. HANDSET COMMUNICATIONS
4-29
4.15 Forced Clear
You can clear the communication line as below when it cannot be cleared through
normal means. This procedure is done from the Administration mode. See page
2-10 for how to choose the Administration mode.
1. Press [FUNC Quit], [6] and [0] to display the Forced Clear display.
6 0 F o r c e d C l e a r
C u r r e n t C a l l
w i l l b e
c l e a r e d .
A R E Y O U S U R E ?
C l e a r : [ 8 2 ]
ForcedClear display
Note: If you are not currently connected the message “MES is idle.” is
displayed and three seconds later the standby display appears.
2. Press [8], [2] to clear the current connection. The display shows “Now
clearing” followed by “Call cleared.” After the call is cleared the main menu
appears.
3. Press the [FUNC Quit] key to close the menu.