Furuno Felcom 82, Operator'S Manual

Page: 35 / 230

2. SETTING UP
2-17
2.9 Manual Entry of Position
When position data from the GPS navigator is not being received correctly, enter
latitude and longitude position manually from the handset in order to acquire and
track a satellite manually. When there is no position input, the status indication for
NAV DATA on the terminal unit changes from NMEA to NONE and the NAV
indication on the handset flashes.
1. Press [FUNC Quit], [5], [4] to show the Position input screen.
5 4 P o s i t i o n
L A T : 0 0 . 0 0 N
L O N : 0 0 0 . 0 0 E
N / S : [ M o d e ]
E n t e r : [ E n t ]
Position input screen
Note: If position data is correctly input from a navigator current position and
the message “NMEA valid” are shown on the position input screen. In
this case entry of position is not necessary.
2. The cursor is selecting LAT. Enter latitude with the numeric keys. Use the
[Mode] key to switch coordinate from North to South and vice versa if
necessary.
3. Press [ ] to select LON. Enter longitude similar to how you entered latitude.
4. Press the [Ent] key to conclude input.
5. Press the [FUNC Quit] to close the menu and return to the standby display.
Note: If invalid data is entered, the message “Input Error! Input data is invalid.”
appears and three seconds later the main menu appears.