Furuno Felcom 82, Operator'S Manual

Page: 153 / 230

6. 9.6k DATA COMMUNICATIONS
6-21
Command
+WLES ▲
+WOR
Description
Stores the LESs access code used for a data call, in the MES.
+WLES=<nnn>
Specifies the LES whose access code is <nnn>. If any value other than 3-digit
one is entered, an error is generated.
<nnn> cannot be omitted. If it is omitted, an error occurs.
If "000" is entered, the leading three digits of the D command are assumed as
the LESs access code. If you enter any 3-digit value other than "000," you do
not need to specify the LESs access code in the D command. The access code
entered here is used.
+WLES?
•
Displays the currently specified access code for the LES as follows:
+WES: nnn
+WLES=?
•
No particular response is returned by the MES.
e.g.: AT+WLES=000<CR>
Changes the currently specified sea area or displays it.
+WOR[=<n>]
Enter a new sea area to <n> by choosing its value from:
0: The appropriate sea area is automatically chosen (Auto).
1: Eastern Atlantic Ocean (AOR-E)
2: Pacific Ocean (POR)
3: Indian Ocean (IOR)
4: Western Atlantic Ocean (AOR-W)
5-8:Currently not used (the sea area is not changed)
If <n> is omitted, the currently specified sea area is displayed as follows:
+WOR: n
+WOR=?
Displays the effective range of parameter for this command as follows:
+WOR: (0-8)
Note: The usage of this parameter differs from that in the SDM.
e.g.: AT+WOR=0<CR>
•
•
•