Furuno Felcom 82, Operator'S Manual

Page: 149 / 230

6. 9.6k DATA COMMUNICATIONS
6-17
Command
\K
\Q
Description
Specifies the action that occurs when the break signal is received.
\K[<n>]
n=0,1 Clears the data in the transmit/reception buffer and sends the break
signal.
n=2,3
Skips the data in the buffer and takes priority in sending the break
signal.
When n=0,2, the MES sends the break signal and then enters the on-line com-
mand mode.
If <n> is omitted, it is assumed as "1."
e.g.: AT\K1<CR>
Sets the flow control between the DTE and the MES (further detailed settings can be
made using the +IFC command).
\Q[<n>]
n=0 No flow control (equivalent to +IFC0,0)
n=1 XON/XOFF flow control (equivalent to +IFC1,1)
n=2 RS/CS flow control (equivalent to +IFC2,2)
n=3 CS flow control (equivalent to +IFC0,2)
n=4 Mono-directional XON/XOFF flow control (equivalent to +IFC0,1)
•
If <n> is omitted, it is assumed as "2."
e.g.: AT\Q1<CR>
•