Furuno Felcom 82, Operator'S Manual

Page: 183 / 230

8. MAINTENANCE, TROUBLESHOOTING
8-9
8.5 Antenna Orientation (for technicians)
This procedure is intended for use by the service technician. The operator should
not attempt to orient the antenna manually; communications may not be possible
if the antenna is incorrectly oriented. This procedure is done from the
Administration mode. See page 2-10 for how to choose the Administration mode.
1. Press [FUNC Quit], [5] and [3] to show the Antenna menu.
5 3 A n t e n n a
A z i m u t h : 0 0 0
E l e v a t i o n : 0 0
H e a d i n g : 0 0 0
A u t o t r a c k : O N
E n t e r : [ E n t ]
Antenna menu
2. Select Azimuth, enter azimuth (000-359) and press the [ ] key.
3. Select Elevation, enter elevation (00-90) and press the [ ] key.
4. Select Heading, enter heading (000-359) and press the [ ] key.
5. Select AutoTrack and press the [ ] key to select OFF.
6. Press the [Ent] key. (If invalid data is found the message “Input Error! Input
data is invalid.” appears for about three seconds and then the main menu is
displayed.)
7. Press the [FUNC Quit] key to close the menu.