Furuno Felcom 82, Operator'S Manual

Page: 161 / 230

7-1
7. HSD COMMUNICATIONS
This section provides the setting information for operation of an HSD (High
Speed Data) Terminal. A computer fitted with an HSD interface is required. An
HSD Terminal communicates over land ISDN line and Inmarsat MES, at 64 kbps
or 56 kbps (USA). The HSD Terminal can be used to access the internet, send
digital images, teleconferencing, remote medical assistance, etc. For
communication procedures see the owners manual of the HSD interface.
This manual discusses the HSD Terminal contained in the HSD Interface. For
communication settings and operation refer to the manual for the HSD I/F
Terminal and Router.
Connecting a single PC as in the figure below you can connect to a subscriber
much easier than by using a dial-up router.
PC
KlasHopper
FELCOM 82
PPP supported
TA/Router
Terminal
Satellite
Line/
Land Line
(Windows 95/98/NT)
internal HSD I/F Interface (option)
KlasHopper MCMCIA400 or PCI-400)
HSD configuration with TA/Router
This configuration offers these advantages:
•
PPP (Point-to-Point Protocol) supported. Therefore, KlasHopper is not required
at the receiving end. You can connect to an internet service provider with an
ordinary modem or terminal adapter.
•
Web browser, mail software may be used.