Furuno Felcom 82 Operator'S Manual Download

Page: 157 / 230

6. 9.6k DATA COMMUNICATIONS

6-25

6.8

S Registers

ATSm=<n>

•

Stores the value “n” in the S register located in the “m”th
position.

ATSm?

•

Reads the value from the S register located in the “m”th
position.

▲

S10

S12

Description

Specifies whether an incoming call is automatically accepted.
Setting range: 0 Not automatically accepted
1-255 Automatically accepted

(Reserved)

Specifies a CR code.
Setting range: 0-127

Specifies a LF code.
Setting range: 0-127

Specifies a BS code.
Setting range: 0-32, 127

(Reserved)

Initial value

▲

Note:

Do not modify any value stored in the reserved S registers and the S

registers that are not listed here. The operation under any modified value is
not covered by our warranty.

Summary of Contents for Felcom 82







































































































































































































































Search results

Summary of Contents for Felcom 82

Reviews:

Related manuals for Felcom 82

Brands by name

Popular brands

Furuno Felcom 82, Operator'S Manual

Search results

Summary of Contents for Felcom 82

Reviews:

Related manuals for Felcom 82

Brands by name

Popular brands