Furuno Felcom 82, Operator'S Manual

Page: 126 / 230

5. OPTIONAL EQUIPMENT
5-6
5.1.5 Intercom
In the MES network on board the vessel you can communicate with another
telephone by dialing its intercom number.
How to use the intercom
1. Pick up the receiver of the telephone and confirm the dial tone.
2. Press [*], dial intercom number and then press [#]. (If you dial an invalid
number, you will hear the "busy tone". Hang up the receiver and dial again.)
3. Talk with party.
4. Hang up the receiver upon completion of call.
When receiving a call during intercom use
When you receive a outside call while talking via the intercom, you will hear three
beeps of 0.3 second duration followed by 2.1 seconds of no tone. Conclude
communications and hang up the receiver. Pick up the receiver when it rings, to
talk with other party.
5.1.6 Holding a call
1. Press the [HOLD] key or [*] key.
2. Hang up the receiver. (See note.)
3. Pick up the receiver to talk.
Note: You can hold a call without hanging up the receiver, by pressing the
[HOLD] key again to talk.
5.1.7 Forwarding a call
You can forward a call to another telephone in the MES network on board the
ship by dialing its intercom number.
1. When you receive a call which is for another telephone, press [*], dial
intercom number (0-3) and then press [#].
2. After confirming connection, hang up the receiver. (If you dial an invalid
intercom number, you will hear the "busy tone." Press the [HOOK] key and
repeat steps 1 and 2. If there is no answer, press the [HOOK] key to cancel
forwarding.)