![background image](http://html.mh-extra.com/html/fujitsu/primergy-cx250-s2/primergy-cx250-s2_upgrade-and-maintenance-manual_120014074.webp)
74
Upgrade and Maintenance Manual
CX250
S2
Basic software procedures
5.2.3
Enabling boot watchdog functionality
If ServerView Operation Manager boot watchdog functionality has been
disabled for firmware upgrade purposes (see section
"Disabling SVOM boot
watchdog functionality" on page 65
), it has to be re-enabled to complete the
maintenance task.
Timer settings can be configured in the BIOS.
Configuring boot watchdog settings in the BIOS
Ê
Enter the BIOS.
Ê
Select the
Server Mgmt
menu.
Ê
Under
OS Watchdog Timer
select the
Enabled
setting.
Ê
Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify settings,
refer to the "System Board D3196 BIOS Setup Utility" reference manual.
5.2.4
Enabling replaced components in the system BIOS
When a processor, an expansion card, or a memory module fails, the defective
component will be set to
Disabled
or
Failed
. The server will then reboot with only
the intact hardware components remaining in the system configuration. After
replacing the defective component, it needs to be re-enabled in the system
board BIOS.
Ê
Enter the BIOS.
Ê
Select the
Advanced
menu.
Ê
Select the status menu of the desired component:
– Memory:
BIOS -> Chipset -> Northbridge -> DIMM enable / disable
Ê
Reset replaced components to
Enable
.
Ê
Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify settings,
refer to the "System Board D3196 BIOS Setup Utility" reference manual.
Summary of Contents for Primergy CX250 S2
