CX250 S2
Upgrade and Maintenance Manual
45
4
Basic hardware procedures
4.1
Shutting down the server node
Safety notes
V
CAUTION!
For further safety information, please refer to chapter
"Important
information" on page 31
.
I
This step is only required when upgrading or replacing non-hot plug
components.
Ê
Inform the system administrator that the server node will be shut down and
put offline.
Ê
Terminate all applications.
Ê
Press the On/Off button either on the rear or on the corresponding front
panel to shut down the server node.
I
If the system is running an ACPI-compliant operating system,
pressing the On / Off button will perform a graceful shutdown.
Summary of Contents for Primergy CX250 S2
