Fujitsu 4860C - fi - Document Scanner Operator'S Manual Download Page 56

Page: 56 / 316

1-30

1.10 How to use the Scanner Driver

⇒

The images of scanned documents are displayed on the [ScandAll 21] window.

Depending on the settings of the application software, images may not be
displayed.

For details, refer to the documentation or Help file of your application.

e.x.) When you select [To File...] from the [Scan] menu of ScandAll 21,
images of scanned documents are not displayed on the window.

Save the scanned images.

Select [Save As...] from the [File] menu to save the scanned images.

If you wish to start another scanning, return to procedure 4.

End the application.

Select [Exit] from the [File] menu.

Summary of Contents for 4860C - fi - Document Scanner





























































































































































































































































































































Search results

Summary of Contents for 4860C - fi - Document Scanner

Reviews:

Related manuals for 4860C - fi - Document Scanner

Brands by name

Popular brands

Fujitsu 4860C - fi - Document Scanner, Operator'S Manual

Search results

Summary of Contents for 4860C - fi - Document Scanner

Reviews:

Related manuals for 4860C - fi - Document Scanner

Brands by name

Popular brands