Fuji Xerox DocuCentre-IV 2060 User Manual Download Page 263

Page: 263 / 399

Scan to PC

261

Scan

Go to

Enter a recipient number using the numeric keypad to display the recipient at the top

of the list.

[

] button

Allows you to confirm information, such as [Name] and [Server Name/IP Address], on

the screen displayed.

Browse (Specifying a Destination PC by Browsing Your Network)

This feature displays a hierarchy consisting of server names and folders. You can

specify a save destination by tracing the hierarchy.

Select [Browse].

Select the destination to save the data in.
Select [Previous] or [Next] to move to
another level.

Important •

You can specify recipients for SMB only.

Server

Shows the current location in the hierarchy.

Add to Address Book

Displays the [Add to Address Book] screen.

Refer to "[Add to Address Book] Screen" (P.261).

Previous

Allows you to move to the upper directory.

Note

•

This button is grayed out if there is no upper directory.

Next

Allows you to move to the lower directory.

Note

•

This button is available when a folder is selected.

[Add to Address Book] Screen

This screen allows you to register the save destination specified in [Browse], in the

Address Book.

Summary of Contents for DocuCentre-IV 2060















































































































































































































































































































































































































Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands

Fuji Xerox DocuCentre-IV 2060, User Manual

Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands