Fuji Xerox DocuCentre-IV 2060 User Manual Download

Page: 124 / 399

3 Copy

122

Co
py

Folding (Outputting Bi-Folded)

This feature allows you to fold copies in half, or crease in half.

Important •

When the Finisher-B1 is installed, do not remove output copies from the finisher tray until all
the output copies have been delivered.

Note

•

The supported paper orientation is only

. Select the tray whose orientation is set to

•

This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.

Select [Folding].

Select any option.

Off

Does not fold copies.

Single Fold

This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) is

installed.
Creases copies in half.

Summary of Contents for DocuCentre-IV 2060















































































































































































































































































































































































































Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands

Fuji Xerox DocuCentre-IV 2060, User Manual

Search results

Summary of Contents for DocuCentre-IV 2060

Reviews:

Related manuals for DocuCentre-IV 2060

Brands by name

Popular brands