Fuji Xerox apeosport-v c5585 User Manual Download Page 443

Page: 443 / 493

Printing and Deleting Stored Jobs

443

Job St

In the entire view, the following operation is available.



(Enlarged view)

A previewed image is enlarged or reduced.

In the enlarged view, the following operations are available.



Print Quantity

Specifies the number of print sets.



Output Color

Displays the output color of the document to be printed.



2 Sided Printing

Displays 1 Sided, Flip on Short Edge, and Flip on Long Edge.



Booklet Creation

Displays Left/Top Bind and Right/Bottom Bind.

Note

•

This item is displayed when the booklet layout is set using a printer driver.

•

When the orientation of booklet creation cannot be detected, "Booklet Creation" is displayed only.



Print

Prints the Sample Set job.

Refer to "When [Print] is Selected" (P.444).

Feature

Operation

Enlarging an image
(Switching to enlarged view)

Double-tap a preview image.

Feature

Operation

Changing the ratio of the
image size

Double-tap a preview image or drag the slider.

Moving the display position

Drag or flick the enlarged image side to side or up and down.

Summary of Contents for apeosport-v c5585













































































































































































































































































































































































































































































































Search results

Summary of Contents for apeosport-v c5585

Reviews:

Related manuals for apeosport-v c5585

Brands by name

Popular brands

Fuji Xerox apeosport-v c5585, User Manual

Search results

Summary of Contents for apeosport-v c5585

Reviews:

Related manuals for apeosport-v c5585

Brands by name

Popular brands