manualshive.com logo in svg

Fuji Xerox apeosport-v c5585, User Manual

Share
Download
Fuji Xerox apeosport-v c5585 User Manual Download Page 37

About License

37

Bef

ore
 Us
ing
 the

 M

a

ch

ine

1

All rights reserved.

Redistribution and use in source and binary forms are permitted provided that this notice is 
preserved and that due credit is given to the University of Michigan at Ann Arbor. The name 
of the University may not be used to endorse or promote products derived from this 
software without specific prior written permission. This software is provided ''as is'' without 
express or implied warranty.

------------------------------------------

The OpenLDAP Public License

Version 2.8, 17 August 2003

Redistribution and use of this software and associated documentation ("Software"), with or 
without modification, are permitted provided that the following conditions are met:

The OpenLDAP Foundation may revise this license from time to time.

Each revision is distinguished by a version number. You may use this Software under terms 
of this license revision or under the terms of any subsequent revision of the license.

THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION AND ITS 
CONTRIBUTORS ''AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, 
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OPENLDAP 
FOUNDATION, ITS CONTRIBUTORS, OR THE AUTHOR(S) OR OWNER(S) OF THE 
SOFTWARE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, 
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGE.

The names of the authors and copyright holders must not be used in advertising or 
otherwise to promote the sale, use or other dealing in this Software without specific, written 
prior permission. Title to copyright in this Software shall at all times remain with copyright 
holders.

OpenLDAP is a registered trademark of the OpenLDAP Foundation.

Copyright 1999-2003 The OpenLDAP Foundation, Redwood City, California, USA. All Rights 
Reserved. Permission to copy and distribute verbatim copies of this document is granted.

DES

This product includes software developed by Eric Young([email protected])

1. Redistributions in source form must retain copyright statements and notices,

2. Redistributions in binary form must reproduce applicable copyright statements and 

notices, this list of conditions, and the following disclaimer in the documentation and/or 
other materials provided with the distribution, and

3. Redistributions must contain a verbatim copy of this document.

Summary of Contents for apeosport-v c5585














































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands