Overview
MCF52235 ColdFire® Integrated Microcontroller Reference Manual, Rev. 6
1-8
Freescale Semiconductor
— Up to 48 MHz crystal input
— On-chip PLL can generate core frequencies up to maximum 60 MHz operating frequency
— Provides clock for integrated EPHY
•
Dual Interrupt Controllers (INTC0/INTC1)
— Support for multiple interrupt sources organized as follows:
– Fully-programmable interrupt sources for each peripheral
– 7 fixed-level interrupt sources
– Seven external interrupt signals
— Unique vector number for each interrupt source
— Ability to mask any individual interrupt source or all interrupt sources (global mask-all)
— Support for hardware and software interrupt acknowledge (IACK) cycles
— Combinatorial path to provide wake-up from low power modes
•
DMA controller
— Four fully programmable channels
— Dual-address transfer support with 8-, 16-, and 32-bit data capability, along with support for
16-byte (4 x 32-bit) burst transfers
— Source/destination address pointers that can increment or remain constant
— 24-bit byte transfer counter per channel
— Auto-alignment transfers supported for efficient block movement
— Bursting and cycle steal support
— Software-programmable DMA requesters for the UARTs (3) and 32-bit timers (4)
•
Reset
— Separate reset in and reset out signals
— Seven sources of reset:
– Power-on reset (POR)
– External
– Software
– Watchdog
– Loss of clock
– Loss of lock
– Low-voltage detection (LVD)
— Status flag indication of source of last reset
•
Chip integration module (CIM)
— System configuration during reset
— Selects one of three clock modes
— Configures output pad drive strength
— Unique part identification number and part revision number
Because
of
an
order
from
the
United
States
International
Trade
Commission,
BGA-packaged
product
lines
and
part
numbers
indicated
here
currently
are
not
available
from
Freescale
for
import
or
sale
in
the
United
States
prior
to
September
2010:MCF52234CVM60,
MCF52235CVM60
