Freedom R8100 SERIES, Operator'S Manual

Page: 89 / 255

89
Standard zone operation of the R8100 (e.g. RF Zone, Audio Zone, etc.). To restore Standard zone
operation press an associated mode key such as Monitor, Generate, Duplex, etc.
NewPic
Figure 2.2.6.4-1 Cable Fault Locator mode
The Cable Fault Locator has settings for entering cable parameters and display specifics. Several standard
cable selections provide predetermined settings. A user can also enter specific data for a cable under test
and save these settings for future use. See Cable Fault Testing
Cable Type
Choose from factory provided or user saved cable selections. This automatically populates the Cable Loss
and Velocity Factor. If No Selection is chosen the user should enter the specific data for the cable under
test.
Center Frequency
Sets the Cable Fault Locator center frequency from 250 kHz to 1 GHz in a data entry window using the
arrow keys, keypad, or tuning knob. Pressing Enter completes the change and Esc cancels the entry.