Freedom R8100 SERIES, Operator'S Manual

Page: 40 / 255

40
Setting the Generator’s RF operating parameters in the RF Zone
To adjust the RF settings press the RF Zone soft key or hot key 1. The RF Zone area of the display
highlights and a new soft key submenu appears as shown in Figure 3.2.2-2. The soft key selections are as
follows:
Figure 3.2.2-2 Generator Mode submenu after RF Zone soft key press
Generator Frequency
Sets the desired monitor frequency in a data entry window from 250 kHz to 3 GHZ using the arrow keys,
keypad, or tuning knob. Pressing Enter completes the change and Esc cancels the entry.
Copy Frequency to Monitor
Sets the R8100 Monitor to the same frequency as the Generator.
Modulation Type
Activates a horizontal submenu with selections for the carrier modulation mode of the R8100 – either FM
or AM. Note: Output Level upper limits are reduced in AM to accommodate peak power levels.