Freedom R8100 SERIES, Operator'S Manual

Page: 50 / 255

50
Figure 3.2.4.3-1 PL Table showing highlighted entry code.
DPL Code (displayed when synthesizer Format selected is DPL or DPL Invert)
Activates a data entry window to enter codes for the Motorola Digital Private-Line coded squelch
signaling format. Code entries are made using the cursor control, numeric keypad, and spin knob. See
Table B-5 in Appendix B for a selection table with a listing of valid DPL codes.
A/B Sequence (displayed when synthesizer Format selected is A/B Sequence)
This soft key brings up a horizontal menu to select one of 4 timing sequences for the two-tone sequential
paging format. The sequences are programmed and appear in the A/B Sequence Table – see next setting.
A/B Sequence Table (displayed when synthesizer Format selected is A/B Sequence)
Activates a programming table for the two-tone sequential paging format – see Figure 3.2.4.3-2, The A/B
Sequence encoding mode uses the Tone A and Tone B generators and one of four selectable timing
sequences determined by the Sequence soft key. Sequences 1 and 2 utilize fixed timing for standard
"tone" and "tone/voice" pagers, while sequences 3 and 4 may be customized through numeric entries by
the user. When the Up/Down (▲▼) keys highlight the programmable sequences (3 and 4) a new submenu