Freedom R8100 SERIES, Operator'S Manual

Page: 31 / 255

31
The RF Zone upper left display area shows the RF settings and measured results during monitor
operation. This includes the frequency of operation (Mon Freq), the signal input port (Mon Port), the
input Attenuation, and other relevant data.
Figure 3.1.1-1 Main screen in Monitor mode showing related information in grouped display zones
Six soft keys to the right enable selection and adjustment of monitor specific modes and parameters.
Figure 3.1.1-1 shows the R8100 display after pressing hard key No1 on the numerical keyboard while in
Monitor or Duplex mode – note the RF Zone section is highlighted. This indicates it is active for user
entry and a new submenu with related selections appears next to the soft keys on the right. Pressing the
Esc key returns the R8100 to the previous menu.