Freedom R8100 SERIES, Operator'S Manual

Page: 57 / 255

57
Select Tone Standard
Choose which Tone Standard is used for the preset Tone Code entries on the General Sequence table.
“None” populates the table with the factory default values shown in Figure 3.2.4.3-6. The remaining
selections are SelCall (Selective Calling) tone standards: CCIR1; CCIR2; PCCIR; CCITT; EEA; EIA;
Euro; NATEL; MODAT; ZVEI1; ZVEI2; ZVEI3; PZVEI; DVZEI; PDZVEI. Regardless of which
standard is chosen, each Tone Code can be selected and edited by positioning the blue highlighting arrow
using the Up/Down (▲▼) keys, or spin knob. Edited tables can be saved as a user defined Sequence
Definition. Reselecting and entering any Tone Standard restores the original table entries.
Synth Mode (also appears in Audio Zone submenu)
Activates a horizontal submenu with an Off, Continuous, or single Burst selection for the Synth generator
transmitting the tone. The status of the Synth Mode is shown in the “Mode” field.
Tone Frequency
Activates a data entry window for customizing the Tone Frequency of the highlighted Tone Code.
Highlight a Tone Code to edit with the blue selection arrow using the Up/Down (▲▼) keys. The
adjustment range is from 0 to 20 kHz in 0.1 Hz steps.
Tone Duration
Activates a data entry window for customizing the Tone Duration of the highlighted Tone Code. Highlight
a Tone Code to edit with the blue selection arrow using the Up/Down (▲▼) keys. The adjustment range
is from 0 to 10 seconds in 0.001 second steps.
Post Tone Delay
Activates a data entry window for customizing the duration of the delay following the transmitted tone.
Highlight a Tone Code to edit with the blue selection arrow using the Up/Down (▲▼) keys. The
adjustment range is from 0 to 10 seconds in 0.01 second steps.
Save Sequence Definition
Activates a data entry window for entering a title and saving the user customized General Sequence Table.
Alpha numeric entries are made using the ▲▼ (Up/Down), and ◄► (Left/Right) keys, numeric keypad,
and spin knob.
Load Sequence Definition
Choose a previously saved Sequence Definition in a selection window using the ▲▼ (Up/Down) keys
and spin knob, then press Enter.
Export Sequence Definition
Save a Sequence Definition stored on the R8100 to an external USB Flash Drive. Choose it in a selection
window using the ▲▼ (Up/Down) keys or spin knob, then press Enter.
Delete Sequence Definition
Delete a Sequence Definition stored on the R8100. Choose it in a selection window using the ▲▼
(Up/Down) keys or spin knob, then press Enter.