Freedom R8100 SERIES, Operator'S Manual

Page: 194 / 255

194
Figure 2.2.7.10-1. AutoTune submenu
AutoTune submenu selections are as follows:
Operator ID
Enter the test operator’s name/number in an alphanumeric entry window using the ◄► (Left/Right) keys,
numeric keypad, ▲▼ (Up/Down) keys, and spin knob. Use Log Out Operator when testing is done. Note:
By default an Operator ID is required to begin testing (Start soft key appears after entry is made). This
can be changed in the “Preferences” selection under the “Tools” submenu.
Radio Make & Model
Choose the manufacturer specific radio to test in a list entry window using the ▲▼ (Up/Down) keys, and
spin knob. Upon selection the AutoTune display provides a diagram for the connections between the
R8100 and radio under test – see Figure 2.2.7.10-2. Pressing “Return” restores the main AutoTune display
window.