Fractal AXE-FX III Owner'S Manual Download Page 32

Page: 32 / 124

4 SETTING UP

POWER AMP & GUITAR SPEAKERS

Global Settings: Modified (see below)

Presets: Factory or Custom
This popular setup uses a power amp and traditional guitar speakers, which are NOT full-range or flat response,

so speaker simulation is disabled globally. Blocks are used to recreate stompboxes, amps, and studio effects.

Depending on your amp, power amp modeling may also need to be disabled globally.

DISABLE SPEAKER CAB MODELING

IMPORTANT: For this setup, bypass Cabinet Modeling

under Global Settings.

Navigate to SETUP: Global Settings: Config.

Change Cabinet Modeling to “BYPASSED”.

CONSIDER YOUR POWER AMP...

There are two categories of power amp that you can

use with the Axe-Fx III. A sonically “neutral” power amp

is generally the preferred variety. Such amps (mostly

solid-state) allow you to use Power Amp Modeling in the

Axe-Fx III, which accurately recreates the appropriate

power amp tone and dynamics for your selected amp

model.
The second category is “non-neutral” power amps,

typically tube-powered, and made specifically for

traditional guitar rigs. This includes not only rackmount

amps, but the power amp in a tube head or combo—

usable for a rig like this one when you plug directly in to

the amp’s FX RETURN jack. The non-neutral power amp

can sound great, but you’ll be “stuck” with the tone and

dynamics of that particular amp, and you will almost

certainly want to disable Power Amp Modeling as

detailed below:

DISABLE POWER AMP MODELING

IMPORTANT: when using a non-neutral power amp, set

Power Amp Modeling under Global Settings to OFF.

Navigate to SETUP: Global Settings: Config.

Change Power Amp Modeling to “OFF”.

CONNECTIONS

Connect your guitar to Input 1 Instrument.

Connect Output 1 L to the input

of your power amp, which is assumed to

already be connected to a guitar speaker

cabinet. You can also connect to the FX

Return jack on many amp heads/combos.

When using 1/4" outputs, Humbuster cables are

recommended to reduce hum from ground loops.

POWER

AMP

GUITAR

SPEAKER

CABINET

INSTR IN

OUTPUT

Optional

for Stereo

Front or Rear

INPUT

OUTPUT

SPKR OUT

SPKR IN

Summary of Contents for AXE-FX III





























































































































Search results

Summary of Contents for AXE-FX III

Reviews:

Related manuals for AXE-FX III

Brands by name

Popular brands

Fractal AXE-FX III, Owner'S Manual

Search results

Summary of Contents for AXE-FX III

Reviews:

Related manuals for AXE-FX III

Brands by name

Popular brands