49
6 SCENES & CHANNELS
Ex 1: SCENE REVERT OFF (default)
1. You load SCENE 1. DRIVE 1 is OFF.
2. You turn DRIVE 1 ON with a Footswitch.
3. You change to SCENE 2.
4. You change BACK to SCENE 1.
5. Drive will be ON as you last left it.
Ex 2: SCENE REVERT ON
1. You load SCENE 1. DRIVE 1 is OFF.
2. You turn DRIVE 1 ON with a Footswitch.
3. You change to SCENE 2.
4. You change BACK to SCENE 1.
5. Drive will be OFF as you last saved it.
SCENE REVERT
Scene changes you make from the Axe-Fx III front panel (or Axe-Edit III) remain in effect until you save them or
discard them by loading a different preset without saving. Changes made via footswitches or MIDI, however, may
work differently, depending on a Global setting called Scene Revert. With Scene Revert turned on, Scene changes
are discarded as soon as you load a new Scene. Here are two examples so you can compare how Scene changes
work in both modes:
TO ENABLE/DISABLE SCENE REVERT…
1. Page to the General page of the MIDI/Remote menu under SETUP.
2.
NAV
to SCENE REVERT and set it “ON” or “OFF” as desired.
3.
EXIT
to finish. (You do not need to STORE changes in SETUP.)
