Fractal AXE-FX III Owner'S Manual Download Page 6 | Manualshive

Page: 6 / 124

background image

iv

Legal Notices

Fractal Audio Systems Axe-Fx III Owner’s Manual. Contents Copyright © 2021. All Rights Reserved.
No part of this publication may be reproduced in any form without the express written permission of Fractal Audio Systems.
Fractal Audio, the Fractal Audio Systems logo, Axe-Fx, Humbuster, UltraRes, FullRes, FASLINK are trademarks of Fractal Audio

Systems. Manufacturer names and product names mentioned herein are trademarks or registered trademarks of their respective

owners, which are in no way associated with or affiliated with Fractal Audio Systems, LLC. The names are used only to illustrate sonic

and performance characteristics.

WARNING: To reduce the risk of fire or electric shock, do not expose this

appliance to rain or moisture.
CAUTION: To reduce the risk of fire or electric shock, do not remove screws.

There are no user serviceable parts inside. Refer servicing to qualified service

personnel.

Important Safety Instructions

1. Obey all warnings on the Axe-Fx III chassis and in this User Guide.

2. Keep away from sources of heat such as ducts, registers or appliances that produce heat.

3. Connect only to a standard grounded AC outlet of 100–240V, 47–63 Hz.

4. Keep the power cord in good condition. Do not kink, bend, or pinch.

5. If the cord becomes damaged, discard and replace it.

6. If not using your Axe-Fx III for extended periods of time, disconnect from AC power.

7. Protect the unit from rain and excessive moisture.

8. Refer servicing to qualified personnel only.

9. Stop operation of the unit and obtain service if:

- Liquids or excessive moisture enter the unit.

- The unit operates incorrectly or performance is inconsistent or erratic.

- The unit has been dropped and/or the enclosure damaged.

10. Prolonged exposure to high volume levels can cause hearing damage and/or loss. The use of

hearing protection in high volume situations is recommended.

A Manual for Online and Print Use

This manual is intended for use in desktop, tablet, and smart phone readers. It includes clickable links and bookmarks to make

navigation and cross-reference easy. We generally recommend against printing, because firmware updates tend to make older

manual versions out of date. That said, considerations have been taken for those who prefer paper. You are granted permission

to print this PDF for personal use only. A copy center or online printer can print and bind a book for you from the PDF file.

Hopefully those with screen readers can forgive the changes made herein to accommodate the print version: all links also

include a page or section numbers, page spreads have extra margins towards the binding edge, and blank pages have been

included to preserve page and chapter flow.

«
...
4
5
6
7
8
...
»

Summary of Contents for AXE-FX III





























































































































Reviews:

No comments

Related manuals for AXE-FX III

Brand: KaVo Pages: 16

Brand: Fein Pages: 248

Brand: ZF Pages: 30

Brand: Raymarine Pages: 111

Brand: Raven Pages: 27

Brand: Raven Pages: 79

Brand: Raven Pages: 88

Brand: Taylor Pages: 70

Brand: Raith Pages: 26

Brand: Kane Pages: 16

Brand: Datex-Ohmeda Pages: 80

Brand: MacDon Pages: 2

Brand: V-TAC Pages: 6

Brand: Hammer Strength Pages: 18

Brand: Raymarine Pages: 124

Brand: Raymarine Pages: 192

Brand: Nautilus Pages: 17

Brand: National Instruments Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands