FOR-A VSF-128128, Operation Manual

Page: 41 / 106

29
2) VSF/TG linkage system (96 cameras
×
32 monitors, when using VSF-9632)
3) Comparison table of 1) and 2)
System 1) No VSF/TG linkage 2) VSF/TG linkage
Required number of TG-1616
units
6 1
Single crosspoint Instant (Same as video)
Approx. 0.3 sec
(Superimpose is OFF
during this time)
Title
switching
time
Multiple
crosspoints
Instant (Same as video)
Max. 3 sec
(Superimpose is OFF
during this time)
Notes on VSF/TG linkage operation
To enable the linkage function with the TG-1616, internal parameter settings need to
be changed. For details, see section 6-2-3. "Linkage Function Setting with TG-1616.”
When changing the channels, the title superimpose is turned off, and then the
superimpose turns on again after the title is changed. (It takes about 0.3 seconds to
change the title for one channel, and it can take up to about 3 seconds to change the
title for all channels at once.)
The routing switcher is not suitable for applications where crosspoints are continually
switched. If using automatic switching functions such as the sequence switching
function of the routing switcher or if executing crosspoint switching commands
continuously, be sure to set intervals of at least 1 second between switching. Also, set
an interval of at least 5 seconds when switching multiple crosspoints at the same time.
If the crosspoint switching interval is shorter than the title changing process time for the
TG-1616, problems can occur such as slow menu operation/display in the TG-1616 or
title display that is too slow to be in sync with the video.
The TG-1616 is placed after the routing
switcher. If the number of outputs is 16, the
system can be configured with one TG-1616
unit. The TG-1616 is linked to crosspoint
switching of the routing switcher. (The TG-1616
superimposes the title of the camera selected by
the routing switcher.)
Cameras
1 to 96 Routing switcher
VSF-9632
TG-1616
ID: 00
Termination: OFF
Monitor
1
Monitor
16
1
96
1
16
SERIAL I/F
SERIAL I/F
RU-3000 remote
control unit REMOTE
REMOTE
Terminator
1
16
TG-1616
ID: 01
Termination: ON
SERIAL I/F
17
32
Monitor
17
Monitor
32
17
32