FOR-A VSF-128128, Operation Manual

Page: 14 / 106

2
Various crosspoint switching operations are available.
Standard crosspoint switching (Crosspoint switching)
Simultaneous switching of multiple crosspoints (Multiple switching)
Simultaneous switching of registered multiple crosspoints (Multiple registered switching)
Automatic switching of input channels at a selected time (Sequence switching)
Automatic switching of registered crosspoints (Auto salvo switching)
Alternate switching between two input channels (Chop switching)
Automatic switching to selected input channel when input signal is disconnected (Alarm
switching)
Alarm function can detect voltage drops in the power supply, stopping of the fan motor, and
malfunctions in the CPU card and indicate alarms by alarm signal output and the LEDs on the
front panel
Includes an operation, alarm, and communication log (record) function (to enable tracing of
causes when a malfunction occurs)
Up to 14 RU-3000 remote control units can be connected.
Enables connection of the FOR-A TG-1616 title generator for allowing camera title switching
linked to VSF crosspoints (VSF/TG linkage operation)
1-3. About This Manual
This manual is intended to help the user easily operate the VSF-600 and make full use of its
functions during operations. Before connecting or operating your unit, read this operation
manual thoroughly to ensure you understand the product. After reading, it is important to keep
this manual in a safe place and available for reference.
Font Conventions
The following conventions are used through out this manual:
Circled text (for example MATT) is used for buttons.
Shaded text (such as OFF) is used for the setting parameters and values in the menus.