FOR-A VSF-128128, Operation Manual

Page: 50 / 106

38
8-7-2. Preset Switching Commands
Crosspoint commands are temporarily stored until execution command is received.
Temporarily stored crosspoints switched simultaneously only after execution command is
received.
(A) Crosspoint preset commands
CR
(1) (2) (3) (4)
(1) Channel type code
V
→
Video signal ASCII 56H
(2) Control code
P
→
Preset ASCII 50H
Switching occurs only after execution command received.
(3) Output channel setting
Enter output channel using 3 digits.
(4) Input channel setting
Enter input channel using 3 digits.
Enter “000” to set no selection.
(B)Execution commands
Execute stored multiple crosspoints switching simultaneously.
V G CR
(1) (2)
(1) Channel type code
V → Video signal ASCII 56H
(2) Control code
G → Execution command ASCII 47H