FOR-A VSF-128128, Operation Manual

Page: 33 / 106

21
Make the data settings and display settings for the channel display card by referring to the flowchart
below.
To view the current data setting, set numbers 1 to 7 of ADR (S6) to the desired value, and then set
number 8 to 1 (ON). The display value is held for 3 seconds.
Purpose Channel DIsplay Procedure
NO
Ex.: Changing the baud
rate of RS-232C
Set ADR (S6)
Press PUSH SW (S4)
Item 16 = 00010000
ADR (S6) 00010000
Do the setting
item and display number
match?
Set DATA (S3)
Press PUSH SW (S4)
3 sec display
Current
setting
DATA (S3) setting
changes are
displayed
immediately.
Current setting New setting
Updated setting New setting
3 sec display
Same display for right
and left
(3 sec display)
Settings complete
YES
Check the ADR (S6)
location.
Same display for right and left
Current setting
To cancel the setting, set DATA
(S3) to 11111111 or set to the
same value as the current data
setting.
NO
YES
This is displayed when no
function is available for the
address setting.