FOR-A VSF-128128, Operation Manual

Page: 34 / 106

22
6-2. Setting Items and Display
The table below shows the parameter setting items and their descriptions. Settings are made for
the version display, RS-232C/RS-422 baud rate, linkage function with the TG-1616 title
generator, and initialization. (In the numbers in parentheses for the address settings (S6) and
data (S3) settings, 1 represents ON and 0 represents OFF, and the switch numbers begin with 1
from the right side.)
Item
Address setting
(ADR)
(S6 setting)
Description/Function
Data setting (S3 setting)
(*Factory default setting)
Version display 0: (00000000) Displays the control
software version
Display only
RS-232C/RS-422
baud rate setting
16: (00010000) Communication
baud rate setting
*9,600 bps:
19,200 bps:
38,400 bps:
(00000000)
(00000001)
(00000010)
Linkage function
setting with
TG-1616
23: (00010111)
ON/OFF for the
linkage function with
the TG-1616
*Setting OFF:
Setting ON:
(00000000)
(00000001)
Initialization
setting
255: (11111111)
Execution of
initialization
Complete
initialization: (00010000)
6-2-1. Version Display – ADR 00000000 –
This displays the version of the installed control software.
Display for channel display card
Revision section (2 digits)
Version section (1 digit)