FOR-A VSF-128128, Operation Manual

Page: 95 / 106

83
ON
OFF
Slot 11
Slot 12
(3) Push up the channel display card diagonally to the upper right, align the (2) lock screw
with the screw hole, and then slowly pull out the card towards the front panel.
(4) Loosen and remove the lock screws (4 locations) on the card installation panels of slots 1
to 12.
(5) Refer to the table below, and insert the video input card (VSF-I3204) into the appropriate
slot. For the slot positions, see the figure below and label affixed to each slot.
Number of input/output
channels before
expansion
Number of input/output
channels after expansion
Number of
required
VSF-I3204
VSF- I3204
insertion slot
96 inputs
×
96 outputs
(VSF-9696)
1 11
64 inputs × 96 outputs
(VSF-6496)
128 inputs × 96 outputs
(VSF-12896)
2 11, 12
96 inputs × 128 outputs
(VSF-96128)
1
11
64 inputs
×
128 outputs
(VSF-64128) 128 inputs
×
128 outputs
(VSF-128128)
2 11, 12
96 inputs
×
32 outputs
(VSF-9632)
128 inputs
×
32 outputs
(VSF-12832)
1 12
96 inputs × 64 outputs
(VSF-9664)
128 inputs × 64 outputs
(VSF-12864)
1 12
96 inputs × 96 outputs
(VSF-9696)
128 inputs × 96 outputs
(VSF-12896)
1
12
96 inputs
×
128 outputs
(VSF-96128)
128 inputs
×
128 outputs
(VSF-128128)
1 12
(6) After expansion of the video input card is completed, perform the above procedure in
reverse to reattach the card installation panel, channel display card, and front panel.