FOR-A VSF-128128, Operation Manual

Page: 35 / 106

23
6-2-2. RS-232C/RS-422 Baud Rate Setting
– ADR 00010000 –
This sets the RS-232C/RS-422 baud rate.
Baud rate
Data
(S3 setting)
9,600 bps 00000000
19,200 bps 00000001
38,400 bps 00000010
Factory default setting: Data 00000000
Display for channel display card
: 9,600 bps
: 19,200 bps
: 38,400 bps
6-2-3. Linkage Function Setting with TG-1616
– ADR 00010111 –
This sets ON/OFF for the linkage function with the TG-1616 title generator.
Linkage function with TG-1616
Data
(S3 setting)
Setting OFF (Disabled) 00000000
Setting ON (Enabled) 00000001
Factory default setting: Data 00000000
Display for channel display card
: Setting OFF (Disabled)
: Setting ON (Enabled)
IMPORTANT
This linkage function is not suitable for the applications where crosspoints are
continuously switched. If using automatic switching functions such as the sequence
switching function of the routing switcher or if executing crosspoint switching
commands continuously, be sure to set intervals of at least 1 second between each
switching. Also, set an interval of at least 5 seconds when switching multiple
crosspoints at the same time.