FOR-A VSF-128128, Operation Manual

Page: 28 / 106

16
4-3. CPU Card
4-3-1. Removing CPU Card
Be sure to turn off the VSF-600 main unit. Checking procedure for CPU card setting installed
in slot 13 is shown below.
1) Loosen securing 2 screws (arrowed) from Channel display card.
2) Push the channel display card diagonally right up, and carefully pull the card forward while
keeping the securing screws in screw holes.
3) Pull ejector on the right end of CPU card and the ejector will turn open outward.
4) Take CPU card from the slot. Make the necessary settings by referring to section 4-3-2
and 4-3-3. For changing parameter settings, refer to section 6. "Parameter Settings".
5) After completing settings, place the card on the rail and slide it into slot.
6) By closing ejector inward, CPU card will be connected to the connector inside.
7) Reinstall the channel display card by reversing procedure 2), and secure with screws.
ON
OFF
Channel display card
CPU card ejector
Securing
screws