FOR-A VSF-128128, Operation Manual

Page: 93 / 106

81
10-3. Video Input Card (VSF-I3204)
10-3-1. Settings and Checks
Before installing the expansion video input card, check that the LEDs and DIP switches on
the expansion card are set as shown below.
(1) Signal detection LEDs
The signal detection LEDs are positioned in order of input channels 1 to 32 starting from
the viewer's left. When a video signal is detected, the LED for the corresponding input
channel turns on.
(2) DIP switches (piano type)
This shows the dipswitches when viewed from the front. In the default setting, all are set to
OFF. The switch position is indicated by
□
in the figure. (Do not change these settings.)
(3) Power indicator LEDs
When DC +12 V, DC +5 V, or DC -5 V power is supplied, the corresponding power
indicator turns on.
(1) Signal
detection LEDs
1 to 32
(3) Power
indicator LEDs
(2) DIP switches
Front
IN02 IN03 IN04 IN05 IN06 IN01 IN07 IN08
IN29 IN30 IN31 IN32
…………
IN10 IN1
1 IN12 IN13 IN14 IN09 IN15 IN16
＜
VSF-I3204
＞
1 2 3 4 ON
Switch
-5 V +5 V +12 V