FOR-A VSF-128128, Operation Manual

Page: 51 / 106

39
Preset Switching Examples
When presetting switching of input 5 to output 2.
V P 0 0 2 0 0 5 CR
(ASCII) 56 50 30 30 32 30 30 35 0D
The crosspoint data is stored by the above command.
When switching multiple crosspoints simultaneously. Maximum command length 255 bits
V P
(ASCII) 56 50
Output channel Input channel
(ASCII)
Output channel Input channel Output channel Input channel
CR
(ASCII) 0D
3 crosspoints data are stored by the above command.
V G CR
(ASCII) 56 47 0D
Sending the above execution command execute switching of stored crosspoints.
8-7-3. Status Request Commands
Command blocks are as below to confirm crosspoint selection status. All commands are
ASCII code (HEX indications given following).
CR
(1) (2) (3)
(1) Channel type code
V → Video signal ASCII 56H
(2) Control code
R → Request status ASCII 52H
(3) Output channel setting
Enter output channel using 3 digits.
Status Request Command Examples
When requesting status of output 2.
V R 0 0 2 CR
(ASCII) 56 52 30 30 32 0D
Output channel
Output channel Input channel