FOR-A VSF-128128, Operation Manual

Page: 84 / 106

72
With this logical channel assignment, if source channel 1 is assigned to destination channel 1,
input signal to the source channel 8 appears at destination 1.
IMPORTANT
If the same logical source channel is assigned to multiple physical source channels, a
signal from a physical source channel that has the smallest channel number is
selected to actually output to the destination channel.
。
If the correspondence between the logical channels and physical channels of the
destination and source are changed by the logical channel assignment function while
sequence switching / auto salvo switching / chop switching / alarm switching is already
in progress, the modified results are used in the switching operation.
9-9-4. Confirming Logical Input Channel Assignment
An example of the command to confirm currently set logical switching source for a physically
connected input is shown in the box below.
The assigned logical source channel number will be returned in numeric order from
physical input channel 1 of the routing switcher.
Contents
Item Parameter Description
Src 0001 – Max. Src Logical source channel set
Command MRS 1 CR+LF
Response MA Src (4) x Max. Src CR+LF
（
Ends normally
）
ER CR+LF
（
Ends abnormally
）