FOR-A VSF-128128, Operation Manual

Page: 60 / 106

48
9-2. Salvo Function
The salvo function is used to switch multiple registered crosspoints simultaneously.
In this function, the simultaneous switching settings are saved in memory, then, when the
switching operation is executed, these settings are recalled and switch the multiple crosspoints
simultaneously. This eliminates the need to record the same crosspoints repeatedly.
Simultaneous switching using the salvo function is executed by the following procedure.
(1) Clear the salvo preset table.
(2) Record the crosspoint in the salvo preset table.
Repeat this step as many times as necessary.
(3) After the crosspoints are recorded, register the settings in the preset table to a salvo
registration number.
(4) Recall the salvo registration number to switch the multiple crosspoints simultaneously
Record the crosspoint
for simultaneous
switchover in the preset
table.
Repeat as needed
Register to a salvo
registration number
Clear the salvo preset
table
Recall the salvo number
to switch multiple
crosspoints
simultaneously.