Foma N902IS Manual Download

Page: 302 / 580

300

pp
li

ppl

i s

nd-

by
di
s

Launching an i-

ppli from a

site

When an i-

ppli launch is specified on an

i-mode site, you can download the i-

ppli from

the site.

This function is unavailable with some sites.

Sites screen (p.214)

Select an item

for launching a program

“YES”

Launching an i-

ppli from a

mail

When an i-

ppli launch specification is pasted

into a received i-mode mail, you can launch the
i-

ppli program from the i-mode mail.

Received mail detail screen (p.265)

Select an item for launching a

program

“YES”

Launching an i-

ppli from

the Infrared data exchange
function

This setting allows you to launch an i-

ppli

when receiving the i-

ppli launch signal during

Infrared data exchange.

“Receive Ir data”

“Receive”

Receive the i-

ppli

launch signal

Launching an i-

ppli using

the Bar code reader

This setting allows you to launch an i-

ppli

using the Bar code reader when a scanned bar
code includes the i-

ppli launch specification.

“Bar code reader”

“New”

Scan a bar code

Select an item for launching a pro-
gram

“YES”

Launching an i-

ppli using

the IC card function

This setting allows you to launch an i-

ppli

using the IC card function by holding the FeliCa
icon on a FOMA terminal over a reader/writer
unit.

A program does not start up in the following situ-
ations:

When another function is running

During a call

When the program to launch is not installed

When IC card lock is set, you cannot launch an
i-

ppli with the IC card function. When you

launch an i-

ppli with other function than IC card

while IC card lock is set, you cannot use the IC
card function with the i-

ppli.

Hold the FeliCa icon “

” on a

FOMA terminal over a reader/writer
unit

<i-

ppli stand-by display>

Setting the i-

ppli Standby

Screen

Use this function to set a selected i-

ppli pro-

gram as the standby screen on your FOMA ter-
minal. When the i-

ppli standby screen

appears, the “

” or “

” icon appears at the

bottom of the screen.

Only one i-

ppli program can be set as the

ppli standby screen.

Some programs cannot be set as the standby
screen.

Software list screen (p.292)

(FUNC)

“Software setting”

“Stand-by display”

“ON”

(Finish)

NOTE

<i-

ppli that is launched immediately from a site>

Unlike ordinary i-

ppli programs, some i-

ppli pro-

grams are immediately launched from i-mode sites.

This type of program is not stored on a FOMA ter-
minal even if you download it from an i-mode site.
This program is not listed even on the Software list
screen.

A message asking whether to start communication
may appear while a program is running.

After a program quits, a message asking whether
to store the program may appear.

Some programs cannot be stored in a FOMA ter-
minal.

NOTE

If multiple data are pasted into a mail, the pasted data
themselves may not be displayed.

When you replay with a quote or forward an i-mode
mail, an i-

ppli launch specification is not quoted. You

cannot also quote a launch specification when for-
warding a mail using the Data Link Software or Infra-
red data exchange function.

ppli programs cannot be launched from i-mode

mails in Secret folders.

LifeKit

NOTE

The “

” icon appears for the program set as the

standby screen.

LifeKit

Summary of Contents for N902IS




































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N902IS

Reviews:

Related manuals for N902IS

Brands by name

Popular brands

Foma N902IS, Manual

Search results

Summary of Contents for N902IS

Reviews:

Related manuals for N902IS

Brands by name

Popular brands