manualshive.com logo in svg

Foma N902IS, Manual, Page: 479 / 580

Share
Download
Foma N902IS Manual Download Page 479

477

Continued on next page

Appendix/External Devices/Troubleshootin

g

Ma

lf

unc

tio

n

 

C

h

eck

list

i-mode, i-mode mail, i-

α

ppli and 

i-channel cannot be connected

d

Is “Host selection” set to “i-mode”?

d

If you had started using the FOMA terminal before you subscribed to 
i-mode, turn the FOMA terminal off and then turn it back on.

p.228

−

The FOMA terminal does not 
perform receiving message 
operations (ring tone sounding, 
vibrator, incoming call lamp 
flashing) when receiving a 
message

d

Is “Mail/Msg. ring time” set to “OFF”?

d

Is “Receiving display” set to “Operation preferred”?

p.133
p.276

A sent message is not saved to 
the Outbox

d

Is “Sort all” set to the folder of mail-connected i-

α

ppli?

Highlight the folder of mail-connected i-

α

ppli then select “Open 

folder” from the function menu to confirm the setting.

p.262
p.269

A received message is not saved 

to the Inbox, and “

” (white) 

does not disappear

d

Does “

” appear on the folder of mail-connected i-

α

ppli in the 

Inbox? Or is “Sort all” set to the folder of mail-connected i-

α

ppli?

Highlight the folder of mail-connected i-

α

ppli then select “Open 

folder” from the function menu to confirm the setting.

p.262
p.269
p.290

The message “

添付ファイル削除

” 

(Attached file deleted) appears on 
a mail message

d

You cannot receive attached files that are not supported by i-mode 
mail. Such attached files are automatically deleted in the i-mode 
center and you receive only the message.

p.240

I was disconnected while sending 
a message, then received an 
SMS
A message appears when I retry

d

SMS interrupts communication and notifies you that a large amount 
of data is being transferred within a given time. Follow the contents 
of SMS and the displayed message.

−

A file attached to a message sent 
from a PC was deleted

d

If the image file is GIF-formatted, which was attached to a message sent 
from a device other than the FOMA terminal, only up to 10,000 bytes can 
be received.

−

Images taken with the rear 
camera are flickered

d

When you take pictures indoors, flickering may appear due to the 
effect of fluorescent lighting, etc. Changing the “Image tuning” 
setting may suppress flickering.

p.194

Still images or movies shot with 
the rear camera look too bright

d

You may shoot them outside or in a bright place with “Image tuning” 
set to “Mode 1(50Hz)” or “Mode 2(60Hz)”. Restore the tuning to 
“Auto” if it is not.

p.194

Still images or movies look blurred

d

Set a mode suited to the scene being shot.

p.194

Attempting to display an image 

displays “

”

or

Attempting to play for 

demonstration or see a preview 

displays “

”

d

“

” may appear when the image data is corrupted.

−

The terminal operates slowly 
when any keypads are pressed

d

It may occur if a large amount of data is stored on the FOMA 
terminal or if you exchange large data by using the miniSD reader/
writer function.

−

Chance capture shooting 
shortens the shooting time

d

Chance capture shooting saves control data together with movie 
data, which may shorten the shooting time.

−

Problem

Points to check

Refer to

Summary of Contents for N902IS





































































































































































































































































































































































































































































































































































































Reviews:

No comments