Flylight Nynja Build, Manual

Page: 45 / 265

45
j) With this measurement verified, the diagonal brace TU310 can be bent to fit in
position and sit flat against the port engine plate. The plate can then be drilled
and the TU310 fixed into position with a 6mm bolt.
The TU310 upper edge should be approximately 0-5mm from the upper edge
of the engine mounting plate.
Check that the distance between the plates has not changed during this
process.
Figure 46 fixing position for TU310
k) The lower engine mounts, Figure 43 and 47, should be attached to the front
vertical tu14 .
Figure 47 Rotax 912 lower engine mounts.
0-5mm