Flylight Nynja Build, Manual

Page: 36 / 265

36
Figure 31, tu40, rear cabin frame cross-piece, looking from the front.
e) Fit the upper ends to the end of the 8mm bolts at the top of the rear cabin
uprights tu6 .
The upper end of the round tube part of tu27 will touch the rear cabin
uprights tu6. If interference appears great, it is permissible to flatten or
file the upper ends of the tu27 to ease this. A steel washer may be
placed under the steel end piece on the rear cabin frame diagonals
tu27
, to further help, but don‟t be concerned at some interference.
Attach the lower ends to the rear of the main undercarriage cross-beam tu9 .
Assemble the rear cabin frame cross-tube tu40 and attach to the rear of the rear
cabin uprights tu6 , but in front of the rear cabin frame diagonals tu27 .
The bolts should point rearwards, and pass through the upper ends of
the stainless braces
tu144 before the rear cabin uprights tu6 and finally
the attachment plate on the rear cabin frame cross-tube tu40 .
Include a thin plastic washer between the brace and the aluminium rear
cabin uprights.
2.6.1 Fuel tank upper mounting pieces.
Refer to Figure 32
a) Where the rear cabin frame cross-tube tu40 crosses the rear cabin frame
diagonals tu27 they should be connected with a bolt, pointing backwards.