Flylight Nynja Build, Manual

Page: 247 / 265

247
Nynja Build manual 1.0
Figure 332 rear securing strap.
c) Pass the upper securing straps around the upper rear fuselage tubes above,
but not around, the turnbuckles.
The straps will have to be slid back down the tubes for them to reach.
d) Burn a hole through each strap where the Velcro is, and secure with small
pan-head bolts, with the pan-head towards the tube.
e) Burn holes in the lower Velcro straps and secure with small pan-head bolts.
f) Connect the lower straps to the rear securing straps using the click-in buckle.
Note that the lower fixing do not go around the rear cabin uprights TU6. The
baggage bag should be free to move upwards and backwards or access to the
fuel tank fillers will be restricted.
26.5 Controls
a) Mount all the control surfaces and secure with split pins, unless further
transportation is to occur.
b) Check the full and free movement, in the correct sense, of all combinations of
the controls.
c) Check the neutral positions of the flaps and their operation.
The flaps should be set with the centre of their trailing edges 125mm
above the corner of the fuselage fairing