Flylight Nynja Build, Manual

Page: 33 / 265

33
2.5 Rear Cabin Frame
2.5.1 Preparing the rear cabin uprights.
Figure 27 rear cabin uprights and correct handing for attachment ofTU2 fuselage longerons
a) Fix the steel U-brackets for the trailing-edges with the taper downwards, using
an aluminium saddle washer under each, against the rear cabin uprights tu6.
The rear cabin uprights tu6 have inner sleeves at their upper end, and
are handed in that the holes that connect the upper rear fuselage
longerons TU2 should be angled for the tailcone taper.
The nuts may foul the upper rear cabin cross-piece tu7 , in this case file
away a little from the TU7 to provide clearance.
A spacer should be used on the bolt inside the tube.