Fluke OF-500 OptiFiber, Technical Reference Handbook

Page: 73 / 282

Getting Started Testing Fiber
Fiber ID Options
2
2-27
Table 2-3. Solving Problems with Fiber ID Lists
Problem Solutions
The ID sequence is invalid. Verify that the types of characters in each position match between the start and stop IDs.
For example, using the letter “O” as the third character in the start ID and the number
“0” as the third character in the end ID causes an error.
Verify that you are not trying to use accented characters as incrementing characters. You
may use accented characters in IDs, but they must match between the start and stop IDs.
Verify that the start and stop IDs have the same numbers of characters.
Verify that the START and STOP IDs do not generate a sequence with more than 3000 IDs.
When you press
s
, you
cannot find the ID list.
After you press
s
, press
A
Pick ID ; then press the appropriate softkey to see the list.
You can access downloaded IDs only if the name of the current folder matches the folder
name selected when the list was downloaded from the PC. Downloaded ID lists are
associated with a folder name, but are saved in internal memory. Switch to the correct
folder or create a new folder with the correct name.