Fluke OF-500 OptiFiber, Technical Reference Handbook

Page: 55 / 282

Getting Started Testing Fiber
General Test Settings
2
2-9
Table 2-2. Job Settings
Setting Description
COMPANY The customer name, job site, job work order, or other job identifier.
OPERATOR The name of the OptiFiber user.
CURRENT FOLDER The destination for tests you save. You can save tests in a folder on the memory card or in the
tester's internal memory. Selecting
CURRENT FOLDER also lets you create a new folder on the
memory card. You cannot create folders in internal memory.
END 1, END 2 Names you assign to the ends of the cabling. The names are saved with test records and also
appear on ChannelMap diagrams.
THIS END The cable end where the tester is located. Based on this setting, the tester labels OTDR,
ChannelMap, FiberInspector, and power meter results as
END 1 or END 2 to indicate which end
of the cabling you tested. Loss/length results are labeled END 1-2 or END 2-1 .
AUTO SEQ TEMPLATE The name of the pattern selected for the list of sequential fiber IDs. See “Creating a List of
Sequential IDs” on page 2-24 for details.
START ID, END ID The first and last IDs in the auto sequence list. See “Creating a List of Sequential IDs” on page
2-24 for details.