Fluke OF-500 OptiFiber Technical Reference Handbook Download Page 135

Page: 135 / 282

Using the ChannelMap Function

ChannelMap Diagram Features

4-5

The length of the channel, including the launch fiber.

Note

The

FIBER LENGTH

shown is the actual length of

the channel rounded to the nearest meter or foot
(not the sum of the displayed segment lengths).

The far end of the channel. The name is set by the

END 1

END 2

setting on the

Job

tab in Setup.

The length of a segment or patch cord rounded to the
nearest meter or foot.

Press

to add a comment to the ChannelMap

results.

A reflective event, usually a connector. Could also be a
mechanical splice or a reflective fault such as a sharp
bend or a crack in the fiber.

The near end of the channel. The name is set by the

END 1

END 2

setting on the

Job

tab in Setup.

Figure 4-3. ChannelMap Diagram Features (cont.)

Summary of Contents for OF-500 OptiFiber



























































































































































































































































































Search results

Summary of Contents for OF-500 OptiFiber

Reviews:

Brands by name

Popular brands

Fluke OF-500 OptiFiber, Technical Reference Handbook

Search results

Summary of Contents for OF-500 OptiFiber

Reviews:

Brands by name

Popular brands