Fluke OF-500 OptiFiber Technical Reference Handbook Download Page 119

Page: 119 / 282

Using the OTDR

Using the Real Time Trace

3-45

To use the real time trace, do the following:

Clean all fiber connectors.

Connect the launch fiber between the tester and the
fiber under test.

Press

; then select

Real Time Trace

To run the real time trace test by pressing

, use

Change Test

on the

HOME

screen to set the test

mode to

Real Time Trace

During the test, you may do the following:

To switch between

Auto Length

and

Fixed Length

press

To magnify the trace or use the measurement cursors,
press

; then use the softkeys and arrow keys to

zoom or set the cursors.

To save the results, press

, select or create a

fiber ID; then press

again.

Summary of Contents for OF-500 OptiFiber



























































































































































































































































































Search results

Summary of Contents for OF-500 OptiFiber

Reviews:

Brands by name

Popular brands

Fluke OF-500 OptiFiber, Technical Reference Handbook

Search results

Summary of Contents for OF-500 OptiFiber

Reviews:

Brands by name

Popular brands